Dual-Head Hair Remover

Dual-Head Electric Hair Trimmer Instruction Manual

Page 1 Product Introduction

Thank you for choosing our company's dual-head electric hair trimmer. This product features a unique dual-head design, with one end equipped with a clipper head specially designed for smoothly trimming long hair, and the other end fitted with a floating dual-ring round head, capable of closely adhering to the skin to efficiently remove short hair. It adopts an innovative design with dual heads and dual motors, offers 7-level waterproof functionality, and operates safely and quietly, providing a novel experience for your personal grooming.

Component Description

①Length-Limiting Comb Teeth

②Clipper Head

③Type-C Charging Port

④Power Switch

⑤Indicator Light

⑥Dual-Ring Floating Head

⑦Protective Cover

⑧Cleaning Brush

⑨Charging Cable

Note

This product contains a built-in lithium battery. Please be sure to operate in accordance with the instructions provided in the manual.

Page 2 Component Disassembly Instructions

The following illustrations and text are intended as a guide for operations:

1. Remove the limit comb

Slide the side of the comb teeth to loosen and then remove the limit comb.

2. Remove the clipper blade head

Push the blade teeth backwards, loosen and then remove the clipper blade head.

3. Remove the rotary blade head

Twist the rotary blade head counter-clockwise until it loosens, then remove it.

4. Remove the rotary blade and screen

Twist the four pillars on the white fixing part inside the blade head. Once loosened, remove the fixing part, blade, and screen.

Page 3

Indicator Light Status Description

No. Item Status

1 Clipper Head Working Red and Blue Light Stay On

2 Round Head Working Blue Light Stays On

3 Low Battery Warning Indicator Light Blinks

4 Charging Red Light Blinks (Breathes)

5 Charge Complete Red Light Stays On

Specifications

No. Item Unit Specification

1 Operating Voltage V 3.7-4.2

2 Operating Current mA 400

3 Power W 2

4 Waterproof Level / IPX7

5 Battery Capacity mAh 400

6 Charging Current mA 400

7 Charging Time H 2

8 Size mm 1673332

9 Weight g 138

Page 4 Precautions

Contraindications

1. Not for use by children.

2. Do not use on facial skin that is injured or severely acne-prone.

3. Avoid excessive movement or prolonged use during operation.

4. Do not remove the blade head while the device is working.

Storage Requirements

Do not expose the product to high-temperature environments.

Keep away from corrosive liquids.

Store the product out of reach of children.

Please do not leave the product unattended when it is in operation.

Do not attempt to disassemble the main unit yourself.

If the blade head is damaged, discontinue use immediately.

If the product is dropped or hit hard, check for damage before continuing use.

Page 5 Guidance for Usage

Usage Instructions

The following are illustrated instructions for using this device:

1. Press and hold the "On/Off" button for 2 seconds to select the clipper mode for trimming long hair.

2. Use the serrated clipper head against the direction of hair growth to trim longer hairs.

3. Press briefly once more to activate the round head shaving mode.

4. Use the dual-ring rotary head against the direction of hair growth, making circular motions to shave off short hairs.

5. After use, press and hold the "On/Off" button for 2 seconds to turn the device off.

6. Remove the used blade head to clean the hair from the storage area.

Page 6 Troubleshooting

Fault Symptom Cause Analysis Solutions

The main unit is not working (blue light turns on then off) Overload causing the circuit system to protect and forcibly shut down 1. Reinstall the round head blade and check if the white fixture is installed backwards.

2. Remove the round head to see if there is any foreign object blocking the blade.

3. If the above attempts do not work, please contact after-sales service.

The main unit is not working (blue and red lights turn on then off) Overload causing the circuit system to protect and forcibly shut down 1. Remove the clipper head to check if any foreign objects are jamming the blade.

2. If the above attempts do not work, please contact after-sales service.

The main unit is not working (no response) Insufficient battery 1.Use after charging.

2.If the above attempts do not work, please contact after-sales service.

Electrical Schematic

Charging Management System

Battery System

MCU

LED Indicator Control System

Clipper Head Control System

Circular Blade Head Control System

Page 7 Attention

Environmental Protection

Product hosts, packaging and accessories are made from recyclable materials. Sorting and recycling waste products can help reuse materials.

Waste Disposal

If there is such a mark on the product, instruction manual or packaging, it is reminded that this product cannot be treated as general household waste at the end of its service life. Please recycle it according to the classification of the waste.

Note

In view of the consistent policy of continuous product improvement, the company reserves the right to change product specifications without notice.

FCC CE RoHS

MADE IN CHINA