6X Ignition Coil & 6X -Spark Plug For 2002-2006 -Audi A4 A6 Quattro 3.0L UF483

Specifications

Length(cm)

35.0, width(cm): 33.0, height(cm): 8.0

Weight(kg)

1.44

Material

Plastic

Color

Black

Placement on Vehicle

Front

Voltage

12V

Connector Gender

Female

Terminal Gender

Male

Terminal Type

Blade

Spark Plug Material

Iridium

Thread Diameter

M14

Thread Length(mm)

19.0

Interchange Part Numbers

7092

UF483

Fitment

2002-2005 A4 V6 3.0L

2002-2006 A4 Quattro V6 3.0L

2002-2003 A6 V6 3.0L

2004-2004 A6 V6 3.0L GAS

2002-2002 A6 Quattro V6 3.0L

2004-2004 A6 Quattro V6 3.0L GAS

Features

Built to strict quality control standards 100% factory tested

IATF16949

100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

Direct replacement

100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability

Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum

It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start，engine vibration, misfiring, inadequate power ,spark plug fouling and poor fuel economy

Attention

How to Change Ignition Coils and Spark Plugs? 1.Disconnect the old ignition coil and spark plugs 2.Disconnect your battery’s negative terminal 3.Locate the ignition coil and spark plugs to be replaced. 4.Release the clip on the plug running into the side of coil. 5.Use a wrench to unscrew the bolts holding the original coil in place 6.Extract original ignition coil and spark plugs from the engine bay 7.Swapping in the new ignition coil and spark plugs 8.Prior to installation, compare the new coil to the old one 9.Orient the new coil in the same direction 10.Insert the bolts to hold the coil in place 11.Activate the New ignition coil and spark plugs 12.Connect the plug into the side coil 13.Plug in ignition cables according to the order written on them. 14.Reconnect the battery 15.Start the vehicle to test the new ignition coil and spark plugs

Note

In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement. pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.